Refrigerated Salad Well - with gantry - RW30MSG
RW30MSG - 1205 x 670 x 900mm

Refrigerated Salad Well - with gantry

GN1/1 gastronorm compatible blown air refrigerated mobile salad well. Ideal for general purpose usage in all catering establishments, schools & colleges, residential care homes, pubs, hotels and cafes

Available from stock for next day despatch

 

Model Number : RW30MSG


Dimensions:
Model – – – – – – – – Dimensions – – – – – – – – – loading
RW30MSg – – – 1205 x 650 x 900mm high – – – – – – 1.6kW

Electrical Connection
220V/240V 1 phase 50 Hz.
Cable: All unit are fitted with two metres of cable and single 13 amp plug.

Refrigerant:
R452a – zero ODP and low GWP refrigerant

Operating Conditions:
Designed to comply with the operating requirements of EN ISO 23953 – 2:2005
Performance level M1 (-1°C to + 5°C) in Climate class 3 (25°C 60% RH 0.2m/s)
In use these units will maintain the core product temperature of pre-chilled food below 5°C in ambient temperatures up to 27°C – 50% Relative Humidity.

Construction
Top: Stainless steel, Exterior: Stainless steel, Interior: Stainless steel.

Well Dimensions & Capacity
1205 model – 975 x 530 x 170mm – 3 x GN1/1 x 100mm deep

Standard Features:
  • L.E.D. illuminated gantry with toughened curved glass sneeze screen/over shelf
  • 304 grade stainless steel well - 170mm deep
  • Load line indicator at 100mm to assist in the safe presentation of food
  • Accepts GN1/1 gastronorm containers up to 100mm deep.
  • Completely removable well giving easy access for cleaning and maintenance.
  • Microprocessor controlled with automatic defrost & condense handling system.
  • Rear operator's side finished in stainless steel.
  • Four x 100mm swivel castors two braked.
Options:

Related Products

PDH1RU- 470 x 580 x 845mm

Heated – roll under – PDH1RU

 Model Number: PDH1RU

A practical heated plate dispenser at 845mm high designed to be positioned under work table allowing the easy access to plates through the front

HC21MS - 825 x 500 x 850mm

Small trolley – HC21MS

 Model Number: HC21MS

A small heated unit ideal for general purpose usage in residential care homes, cafes & schools. Available from stock for next day despatch

BM40MS - 4 x GN1/1 - 1600 x 670 x 900mm

4 x GN1/1 – BM40MS

 Model Number: BM40MS

GN1/1 gastronorm compatible heated unit. Ideal for general purpose usage in all catering establishments, residential care homes, pubs, hotels, cafes, schools & colleges. Available from stock for next day despatch Containers not included

Tray slide – three bar 38mm curved – TSAC

 Model Number: TSAC

Tray slides suitable for use with most Victor Jamaican base units Model No: TSAC20 for 2 x GN1/1 size units Model No: TSAC30 for 3 x GN1/1 size units Model No: TSAC40 for 4 x GN1/1 size units Model No: TSAC50 for 5 x GN1/1 size units For low level version Use Prefix TSLC

ABM1- 1270 x 700 x 900mm

HotKold – AMB1

 Model Number: AMB1

Ambassador trolleys are suitable for use in hospitals, nursing homes community care centres, elderly persons homes and other residential care facilities. They are also ideal for use in executive suites and conference centres. 3 x GN1/1 bains marie one heated cupboard one chilled / ambient cupboard Model Number AMB3T - Golden Oak Effect Plastic Coated Steel AMB1 Only available from stock for next day despatch  

SFHRT3 - 1177 x 660 x 540mm

Recessed top – SFHRT

 Model Number: SFHRT

The Synergy range of Heated dry heat recessed displays designed to be dropped into a counter surface to form a food servery. Four sizes in the range which accept 100mm deep, GN1/1 size containers. Each display is self-contained and easily installed. Model No: SFHRT2 - 2 x GN1/1 size Model No: SFHRT3 - 3 x GN1/1 size Model No: SFHRT4 - 4 x GN1/1 size Model No: SFHRT5 - 5 x GN1/1 size